Fitting Sheet

Suggestions only! Correct selection & fiting are the responsibility of the purchaser.

Some of the machines our Points have been fitted to. Not all included here.
Cat Nos. are suggestions only.

Machines Suggested Compatible Points (Cat No) Tyne Bolt Hole
AFM Cultivator 5a, 8a, 10a1, 10b1, 12a, 12b, EW47, EW51 2 x 7/16”
AFM Scari Chisel 5b, 8b, 10a2, 12a, 12b, EW47, EW51 2 x 1/2”
AGROPLOW
700 Coil &
P/R 90 Spring		 1, 2, 3, 4, 7, EW46 (and conventional) 1 x 7/16”
AGROPLOW
732 Coil		 EW47 adaptor to use - ES, ET, ER, DR, DS 1 x 7/16”
ALFARM 1, 2, 3, 4, 7, EW46 (and conventional) 1 x 7/16”
BOURGAULT
9400 & 9800		 5b, 8b, 10a2, 12a, 12b, EW47, EW51 2 x 1/2”

CASE IH
C Shank

 5b, 8b, 10ab, 10b2, 12a, 12b, EW47, EW51 2 x 1/2"

CONNOR-SHEA
Scarifier

  9, 9H/D, EW50 (and conventional) 1 x 1/2" 
CONNOR-SHEA
Seeder		 (Using 1 Flat Tyne Adaptor) 1, 2, 3, 4, 7 (and Conventional) 2 x 7/16"
DBS DB Blade (Using DB Adaptor) 2 x 1/2"
EZZE ON 5b, 8b, 10ab, 10b2, 12a, 12b, EW47, EW51 2 x 1/2"
FLEXI COIL 265
/350		 5a, 8a, 10a1, 10b1, 12a, 12b, EW48, EW51 2 x 7/16"
FLEXI COIL 550 5b, 8b, 10a2, 10b2, 12a, 12b, EW48, EW51 2 x 1/2"
FLEXI COIL
Stealth		 SR, SS Roll Pin
FORWARD ENGINEERS
270/800		 1, 2, 3, 4, 7, (and conventional) 2 x 7/16"
3000/ 4000 5b, 8b, 10a2, 12a, 12b, EW48, EW51 2 x 1/2"
350 Scarifier 9, 9H/D, EW50 (and conventional) 1 x 1/2"
FRIGGSTAD 5b, 8b, 10a2, 10b2, 12a, 12b, EW47, EW51 2 x 1/2"
GASON
Cultimaster		 1, 2, 3, 4, 7, EW46 (and conventional) 1 x 7/16"
GASON
Scaritill		 5b, 8b, 10a2, 10b2, 12a, 12b, EW48, EW51 2 x 1/2"
GYRAL
Penetrator
350/ 500		 5a, 8a, 10a1, 10b1, 12a, 12b, EW47, EW51 2 x 7/16"
HOWARD BAGSHAW
Scaribar		 5b, 8b, 10a2, 10b2, 12a, 12b, EW48, EW51 2 x 1/2"
Stubblemaster /
Tillmaster		 9, 9H/D, EW50, (and conventional) 1 x 1/2"
INTERNATIONAL
2-11 Scarifier		 9, 9H/D, EW50, (and conventional) 1 x 7/16"
INTERNATIONAL
751 Combine		 1, 2, 3, 4, 7, EW46 (and conventional) 1 x 7/16"
JANKE
With Roll Pin		 (Using Janke Adaptor), ES, ET, ER, DR, DS Roll Pin
JANKE
Double Bolt Hole Shank		 5b, 8b, 10a2, 10b2, 12a, 12b, EW48, EW51 2 x 1/2"
JOHN SHEARER
580/ 620/ 5-160		 1, 2, 3, 4, 7, EW46 (and conventional) 1 x 7/16"
JOHN SHEARER
580 Cultivator		 5a, 8a, 10a1, 10b2, 12a, EW48, EW51 2 x 7/16"
JOHN SHEARER
Trashworker		 5b, 8b, 10a2, 12a, 12b, EW48, EW51, (subject to hole spacings) 2 x 1/2"
JOHN DEERE 735/
737/ 700/ 725
Combine		 1, 2, 3, 4, 7, EW46 (and conventional) 1 x 7/16"
LEON 5b, 8b, 10a2, 10b2, 12a, 12b, EW48, EW51 2 x 1/2"
MORRIS 400 5a, 8a, 10a1, 10b2, 12a, EW47, EW51 2 x 7/16"
MORRIS 650 5b, 8b, 12a2, 10b2, 12a, 12b, EW48, EW51 (adaptors avaliable for gumbo boot) 2 x 1/2"
NAPIER
Grass lands Scarifier		 9, 9H/D, EW50 (and conventional) 2 x 1/2"
NAPIER
Chisel		 5b, 8b, 10a2, 10b2, 12a, 12b, EW48, EW51 (adaptors available for gumbo boots) 2 x 1/2"
NAPIER
Cultivator		 1, 2, 3, 4, 7, EW46 (all conventional) 1 x 7/16"
PRIMARY SALES
Spring Coil Tyne		 1, 2, 3, 4, 7, EW46 (all conventional) 1 x 7/16"
RYAN 80 / 90
Series		 1, 2, 3, 4, 7, EW46 (all conventional) 1 x 7/16"
SIMPLICITY
Hydrolic Tyne		 5b, 8b, 10a2, 10b2, 12a, 12b, EW47, EW51 2 x 1/2"
SMALE
Medium/ Heavy		 5b, 8b, 10a2, 10b2, 12a, 12b, EW47, EW51 2 x 1/2"
File 88