Ezi Fit System

MORE INFO

Ezi Ripper

PT-10ER

$47.00

  • Ezi Fit system knife point.
  • 100mm Digging Depth.
  • Fits both the Wedge Adaptor and 2 Bolt Curved Adaptor. 
  • This No-Till wear resisting point will give long lasting life.
  • Stealth option to suit Flexicoil Stealth seeding kits.
  • Made from extremely wear resistance Ni Hard 4 material.

Ezi Ripper

PT-10ER
$47.00
MORE INFO

Deep Ripper

PT-10DR

$48.00

  • Ezi Fit system knife point.
  • 130mm digging depth 
  • 75 degree digging depth.
  • Fits both the Wedge Adaptor and 2 Bolt Curved Adaptors.
  • This no-till wear resisting point will give long lasting life.
  • Made from extremely wear resistance Ni Hard 4 material.

Deep Ripper

PT-10DR
$48.00
MORE INFO

Ezi Seeder

PT-10ES

$51.00

  • Ezi Fit System winged point.
  • 100mm digging depth.
  • 60mm wing width.
  • Fits both the Wedge Adaptor and 2-Bolt Curved Adaptor.
  • This Minimum till wear resisting point will give long lasting life.
  • With tungsten tipped leading edges and wing protection this inverted "T" point is one of our best sellers. 
  • Made from extremely wear resistance Ni Hard 4 material.

Ezi Seeder

PT-10ES
$51.00
MORE INFO

Deep Seeder

PT-10DS

$52.00

  • Part of Maxipoints Ezi Fit system.
  • 60mm wing width.
  • 130mm digging depth
  • 75 degree working angle.
  • Fits both the Wedge Adaptor and 2-Bolt Curved Adaptor. 
  • This minimum till wear resisting point will give long lasting life with Tungsten tipped leading edges and wing protection.
  • Made from extremely wear resistance Ni Hard 4 material.

Deep Seeder

PT-10DS
$52.00
MORE INFO

Ezi Tiller

PT-10ET

$54.00

  • 100mm wing width for extra ripping. 
  • 100mm digging depth.
  • Suits the Wedge Adaptor and 2 Bolt Curved Adaptor. 
  • Tungsten on the leading knife edge.
  • Made from extremely wear resistance Ni Hard 4 material. 

Ezi Tiller

PT-10ET
$54.00
MORE INFO

Stealth Ripper

PT-10SR

$48.00

  • Fits the Stealth Flexi-Coil system.  
  • Comes standard with two tungsten tiles with the thickest tungsten at the tip where it engages with the most abrasive soil.
  • Made from proven long lasting metals.
  • Hardfacing weld can be applied.

Stealth Ripper

PT-10SR
$48.00
MORE INFO

Wedge (1/2 x 45mm)

PT-1MW1

$16.00

  • To suit 1/2'' bolt hole size, with 45mm hole centres.

Wedge (1/2 x 45mm)

PT-1MW1
$16.00
MORE INFO

Wedge (7/16 x 45mm)

PT-1MW2

$16.00

  • To suit 7/16'' bolt hole size, with 45mm hole centres.

Wedge (7/16 x 45mm)

PT-1MW2
$16.00
MORE INFO

Wedge (1/2 x 57mm)

PT-1MW3

$16.00

  • To suit 1/2'' bolt hole size, with 57mm hole centre.

Wedge (1/2 x 57mm)

PT-1MW3
$16.00
MORE INFO

Wedge Adaptor

PT-1EWA

$23.00

  • Fits on most Wedges for use on two-bolt Cultivators and Chisel Plows.
  • Suits Ezi Fit Range.
  • Split pin included.

Wedge Adaptor

PT-1EWA
$23.00
MORE INFO

2 Bolt Curved Adaptor

PT-1E48

$36.00

  • Fits two-bolt Cultivators and Chisel Plows.
  • Suits the Ezi Fit Range.
  • Takes 1/2'' bolt holes.
  • Quickly change from no-till to maximum till.
MORE INFO

Culti Adaptor

PT-1EW46

$28.00

  • Adaptor for Ezi Fit range of points on Single Bolt Cultivators. 
  • Common bolt size: 7/16 x 2 1/4.

 

Culti Adaptor

PT-1EW46
$28.00
MORE INFO

Scari Adaptor

PT-SA

$32.00

  • Fits Scarifier tynes.
  • Uses one 2 1/2 x 1/2 bolt.
  • Suits the Ezi Fit Range.

Scari Adaptor

PT-SA
$32.00
MORE INFO

Ezi Knock in Roll Pin

PT-10EP

$1.00

  • For use with the Ezi Fit System.
  • One roll pin required per point 
  • Recommended new roll pin fitted with each point change