Case Concord Tyne

  • Product Type

    Filter by product type All Points
MORE INFO

Slot Mate Vertical 12mm Tungsten

PT-1SMV

$54.00 + GST

  • The original and best selling Slot Mate.
  • This point has 3 tungsten tiles on the leading edge with the thickest tile at the tip to increase wear life.
  • The Slot Mate V 12mm has an effective working angle of 70 degrees and has a digging depth of 7".
  • Working angle for minimum till seeding. 
  • Various tungsten options available. 
MORE INFO

Slot Mate Vertical 15mm Tungsten

PT-1SMV5

$58.00 + GST

  • The original and best selling Slot Mate point.
  • This point has 3 tungsten tiles on the leading edge with the thickest tile at the tip to increase wear life.
  • The Slot Mate V 15mm has an effective working angle of 70 degrees and has a digging depth of 7".
  • Working angle for minimum till seeding.
  • Various tungsten options available. 
MORE INFO

Slot Mate Vertical - Super Long Life

PT-1SMV8

$78.00 + GST

  • Slot Mate Vertical SLL, extra tungsten on point
  • Effective working angle of 70 degrees and has a digging depth of 7".
  • Extra tungsten and hardfacing.
  • Exceptional wear protection. 
MORE INFO

Slot Mate Straight 12mm Tungsten

PT-1SMS

$54.00 + GST

  • 12mm tungsten tiles on the leading edge with the thicker tungsten at the bottom where its needed most.
  • This point does not dig as deep as the Slot Mate V due to its straighter angle (60 degrees).
  • Due to a more horizontal angle less horse power is required to pull this point.
  • Slot mate straight comes with 8mm liquid hose hole as standard.
MORE INFO

Slot Mate Straight 15mm Tungsten

PT-1SMS5

$58.00 + GST

  • 15mm tungsten tiles on the leading edge with the thicker tungsten at the bottom where its needed most.
  • This point does not dig as deep as the Slot Mate V due to its straighter angle (60 degrees).
  • A more horizontal angle means less horsepower is required to pull this point.
  • Slot mate straight comes with 8mm liquid hose hole as standard.
MORE INFO

Slot Mate Straight - Super Long Life

PT-1SMS8

$78.00 + GST

  • Super Long Life point.
  • This point does not dig as deep as the Slot Mate V due to its angle (60 degrees).
  • A more horizontal angle means less horsepower is required to pull this point.
  • Slot mate straight comes with 8mm liquid hose hole as standard.
  • Extra tungsten and hardfacing. 
  • Exceptional wear protection. 
MORE INFO

Slot Mate Dyna

PT-1SMD

$56.00 + GST

  • This point fits the Slot Mate quick change adapter.
  • Modelled on the Dyna Blade Curved.
  • Made from ultra long-life toughened steel.
  • 3 tungsten tiles on the leading edge with the thickest tungsten at the tip where its needed most.
  • 6" depth with a moderate angle of attack. 

Slot Mate Dyna

PT-1SMD
$56.00 + GST
MORE INFO

Slot Mate Flexi

PT-1SMF12

$69.00 + GST

  • Inverted T design to increase soil disturbance.
  • Ultra long life toughened steel with tungsten tiles on leading edge and on the underside of the 60mm wing.
  • Hard facing wire welded above the tungsten tiles and on the side of the point for ultimate wear protection.
  • Point angle 70 degrees which is the same as the Slot Mate V knife point.

Slot Mate Flexi

PT-1SMF12
$69.00 + GST
MORE INFO

Slot Mate V5 Short

PT-1SMV5C

$58.00 + GST

  • Shortest point in Slot Mate Range.
  • 15mm tungsten. 
  • 50mm shorter than the Slot Mate V.
  • The Slot Mate V5 Short is for use with hard ground, rough or rocky paddocks. 

Slot Mate V5 Short

PT-1SMV5C
$58.00 + GST
MORE INFO

Case Concord Kit

PC-4001

$215.00 + GST

Case Concord Kit

PC-4001
$215.00 + GST