Slot Mate System
Slot Mate Vertical 15mm
PT-1SMV5
$59.00 + GST
- The original and best selling Slot Mate point.
- This point has 3 tungsten tiles on the leading edge with the thickest tile at the tip to increase wear life.
- The Slot Mate V 15mm has an effective working angle of 70 degrees and has a digging depth of 7".
- Working angle for minimum till seeding.
- Various tungsten options available.
Slot Mate Vertical 12mm
PT-1SMV
$55.00 + GST
- The original and best selling Slot Mate.
- This point has 3 tungsten tiles on the leading edge with the thickest tile at the tip to increase wear life.
- The Slot Mate V 12mm has an effective working angle of 70 degrees and has a digging depth of 7".
- Working angle for minimum till seeding.
- Various tungsten options available.
Slot Mate Straight 15mm
PT-1SMS5
$59.00 + GST
- 15mm tungsten tiles on the leading edge with the thicker tungsten at the bottom where its needed most.
- This point does not dig as deep as the Slot Mate V due to its straighter angle (60 degrees).
- A more horizontal angle means less horsepower is required to pull this point.
- Slot mate straight comes with 8mm liquid hose hole as standard.
Slot Mate Straight 12mm
PT-1SMS
$55.00 + GST
- 12mm tungsten tiles on the leading edge with the thicker tungsten at the bottom where its needed most.
- This point does not dig as deep as the Slot Mate V due to its straighter angle (60 degrees).
- Due to a more horizontal angle less horse power is required to pull this point.
- Slot mate straight comes with 8mm liquid hose hole as standard.
Slot Mate Straight - Super Long Life
PT-1SMS8
$79.00 + GST
- Super Long Life point.
- This point does not dig as deep as the Slot Mate V due to its angle (60 degrees).
- A more horizontal angle means less horsepower is required to pull this point.
- Slot mate straight comes with 8mm liquid hose hole as standard.
- Extra tungsten and hardfacing.
- Exceptional wear protection.
Slot Mate Flexi
PT-1SMF12
$70.00 + GST
- Inverted T design to increase soil disturbance.
- Ultra long life toughened steel with tungsten tiles on leading edge and on the underside of the 60mm wing.
- Hard facing wire welded above the tungsten tiles and on the side of the point for ultimate wear protection.
- Point angle 70 degrees which is the same as the Slot Mate V knife point.
Slot Mate Dyna
PT-1SMD
$57.00 + GST
- This point fits the Slot Mate quick change adapter.
- Modelled on the Dyna Blade Curved.
- Made from ultra long-life toughened steel.
- 3 tungsten tiles on the leading edge with the thickest tungsten at the tip where its needed most.
- 6" depth with a moderate angle of attack.
Slot Mate E
PT-1SMEA
$18.00 + GST
- Designed to accommodate the points from the Ezi Fit range to be used with a Slot Mate Adapter.
- Comes drilled to allow for knock in roll pin.
- Allows famrers to change from no till (Slot Mate knife points) to maximum till (Ezi Tiller) quickly and efficiently with no bolts required.
Slot Mate A '6'
PT-1071
$57.00 + GST
- 6" digging depth.
- Quick change deep blade system.
- Fatter, thicker tongue to accommodate higher breakout and vertical angle.
- Enclosed adapter to increase trash flow.
- Thicker tungsten at the tip where its needed most.
- Comes standard with heavy duty lynch pin ensuring no lost points.
Slot Mate A '7'
PT-1072
$57.00 + GST
- 7" digging depth.
- Quick change deep blade system.
- Fatter, thicker tongue to accommodate higher breakout and vertical angle.
- Enclosed adapter to increase trash flow.
- Thicker tungsten at the tip where its needed most.
- Comes standard with heavy duty lynch pin ensuring no lost points.
Slot Mate A '8'
PT-1073
$57.00 + GST
- 8" digging depth.
- Quick change deep blade system.
- Fatter, thicker tongue to accommodate higher breakout and vertical angle.
- Enclosed adapter to increase trash flow.
- Thicker tungsten at the tip where its needed most.
- Comes standard with heavy duty lynch pin ensuring no lost points.
Showing items 1-29 of 29.