Gason

• The original and best selling Slot Mate point.
• This point has 3 tungsten tiles on the leading edge with the thickest tile at the tip to increase wear life.
• The Slot Mate V 15mm has an effective working angle of 70 degrees and has a digging depth of 7".
• Working angle for minimum till seeding.
• Various tungsten options available. 

• Slot Mate Vertical SLL, extra tungsten on point
• Effective working angle of 70 degrees and has a digging depth of 7".
• Extra tungsten and hardfacing.
• Exceptional wear protection. 

• 12mm tungsten tiles on the leading edge with the thicker tungsten at the bottom where its needed most.
• This point does not dig as deep as the Slot Mate V due to its straighter angle (60 degrees).
• Due to a more horizontal angle less horse power is required to pull this point.
• Slot mate straight comes with 8mm liquid hose hole as standard.

• 15mm tungsten tiles on the leading edge with the thicker tungsten at the bottom where its needed most.
• This point does not dig as deep as the Slot Mate V due to its straighter angle (60 degrees).
• A more horizontal angle means less horsepower is required to pull this point.
• Slot mate straight comes with 8mm liquid hose hole as standard.

• Inverted T design to increase soil disturbance.
• Ultra long life toughened steel with tungsten tiles on leading edge and on the underside of the 60mm wing.
• Hard facing wire welded above the tungsten tiles and on the side of the point for ultimate wear protection.
• Point angle 70 degrees which is the same as the Slot Mate V knife point.

• Angle designed for minimum soil throw
• Wedge on point, locked on with a split pin
• 3 tungsten tiles, thickest at the tip where its needed most
• Made from cast steel
• Price includes split pin. 

• Straighter angle knife point for less drag and more soil throw
• Wedge on point, locked on with a split pin
• 3 tungsten tiles, thickest at the tip where its needed most
• Made from cast steel, similar to spring steel.
• Price includes split pin.

• A no till point fabricated from spring steel for unparalleled strength.
• Extra tungsten at the tip where its needed most.
• 6" digging depth designed for minimum soil throw.
• Fits any two bolt cultivators.
• The dyna blade curved is designed to suit curved C shank tynes.
• Approx weight 1.65kg.

• For wider seed placement
• Heavy duty construction
• 12mm plate
• Closer plate protected by two tungsten tiles
• Slotted holes on tyne frame allows it to fit virtually all systems
• Single shoot practices
• Replaceable closer plate
• Dipped in protective black paint
• Bolts and u-bolts included

Download the Instruction Manual below: 

• 12mm Plate Steel.
• Adjustable Closer Plate height.
• Tungsten Wear Protection running full width of closer plate.
• Choice of closer plates and are replaceable.
• Suits 2-bolt Chisel Plows and Cultivators.
• Can be used as a Single Shoot System.
• Dipped in protective paint.
• Suits 32mm and 38mm hose .
• 50mm square u-bolts included.
• Robust welded construction.

Download the Instruction Manual below: 

• Robust design.
• Fits Single, Double and Edge-on tyne frames.
• Dipped in Protective black paint.
• Adjustable depth.
• Allows for double and single shoot practices.
• Slotted holes to fit virtually all systems. 
• Dipped in protective paint.
• 12mm steel replaceable closer plate.
• Bolts and  U-bolts supplied.

Download the Instruction Manual below: 

• Designed to accommodate the points from the Ezi Fit range to be used with a Slot Mate Adapter.
• Comes drilled to allow for knock in roll pin.
• Allows famrers to change from no till (Slot Mate knife points) to maximum till (Ezi Tiller) quickly and efficiently with no bolts required.

• Fits on most Wedges for use on two-bolt Cultivators and Chisel Plows.
• Suits Ezi Fit Range.
• Split pin included.

• Fits two-bolt Cultivators and Chisel Plows.
• Suits the Ezi Fit Range.
• Takes 1/2'' bolt holes.
• Quickly change from no-till to maximum till.

• To suit 1/2'' bolt hole size, with 57mm hole centre.