Points
1 Bolt Ripper
$46.00 + GST
Combine Cultivator - SG Iron
- Heavy duty direct drill, no till
- Common Knife point, fits most tynes.
- Common bolt size: 7/16 x 2 1/4.
- Tungsten leading edge
- Extra tungsten at the tip where its needed most
- Hex bolt insert for easy fastening to tyne and only one spanner required
CK Point
$79.00 + GST
- Suits Bourgault Paralink.
- 3 height settings.
- Extra tungsten and hard facing upgrades available.
- Liquid Ready
CK Point - Liquid
$89.00 + GST
- Suits Bourgault Paralink
- 3 height settings.
- Extra hardfacing and tungsten upgrades available.
- Liquid ready.
CK Point - Liquid Block
$89.00 + GST
- Suits Bourgault Paralink
- 3 height settings.
- Extra hardfacing and tungsten upgrades available.
- Liquid Ready.
Conserva Point - Hardfaced
$75.00 + GST
- To suit the Conserva Pak.
- Made from a high grade wear resistance steel.
- Tungsten tiles with the thickest at the tip where its needed most.
- Hardfacing welded for added wear resistance.
Conserva Sweep
$62.00 + GST
Conserva Pak Sweep
- Heavy duty sweep for full cut ripping.
- Hardface wear protection.
- Specify width on order.
Deep Ripper
$48.00 + GST
- Ezi Fit system knife point.
- 130mm digging depth
- 75 degree digging depth.
- Fits both the Wedge Adaptor and 2 Bolt Curved Adaptors.
- This no-till wear resisting point will give long lasting life.
- Made from extremely wear resistance Ni Hard 4 material.
Deep Seeder
$52.00 + GST
- Part of Maxipoints Ezi Fit system.
- 60mm wing width.
- 130mm digging depth
- 75 degree working angle.
- Fits both the Wedge Adaptor and 2-Bolt Curved Adaptor.
- This minimum till wear resisting point will give long lasting life with Tungsten tipped leading edges and wing protection.
- Made from extremely wear resistance Ni Hard 4 material.
Dyna Blade Curved
$62.00 + GST
- A no till point fabricated from spring steel for unparalleled strength.
- Extra tungsten at the tip where its needed most.
- 6" digging depth designed for minimum soil throw.
- Fits any two bolt cultivators.
- The dyna blade curved is designed to suit curved C shank tynes.
- Approx weight 1.65kg.
Dyna Blade Flat
$62.00 + GST
- A no till point fabricated from spring steel for unparralleled strength.
- 6" Digging depth designed for minimum soil throw.
- Extra tungsten at the tip where its needed most and 127mm of tungsten for superior blade protection.
- Fits any two bolt cultivators.
- The Dyna blade flat is designed to fit on flat tynes.
- Approx weight 1.65kg.
Ezi Blade Straight
$57.00 + GST
- Straighter angle knife point for less drag and more soil throw
- Wedge on point, locked on with a split pin
- 3 tungsten tiles, thickest at the tip where its needed most
- Made from cast steel, similar to spring steel.
- Price includes split pin.
Ezi Blade Vertical
$57.00 + GST
- Angle designed for minimum soil throw
- Wedge on point, locked on with a split pin
- 3 tungsten tiles, thickest at the tip where its needed most
- Made from cast steel
- Price includes split pin.
Ezi Ripper
$47.00 + GST
- Ezi Fit system knife point.
- 100mm Digging Depth.
- Fits both the Wedge Adaptor and 2 Bolt Curved Adaptor.
- This No-Till wear resisting point will give long lasting life.
- Stealth option to suit Flexicoil Stealth seeding kits.
- Made from extremely wear resistance Ni Hard 4 material.
Ezi Seeder
$51.00 + GST
- Ezi Fit System winged point.
- 100mm digging depth.
- 60mm wing width.
- Fits both the Wedge Adaptor and 2-Bolt Curved Adaptor.
- This Minimum till wear resisting point will give long lasting life.
- With tungsten tipped leading edges and wing protection this inverted "T" point is one of our best sellers.
- Made from extremely wear resistance Ni Hard 4 material.
FlexiPlus 1/2
$67.00 + GST
- Around 50% longer life.
- Inverted T design for minimum till.
- Stronger neck.
- Thicker tungsten.
- Deeper banding.
- Tougher wings.
- Uses two 2 1/4 x 1/2.
Maxi Knife
$45.00 + GST
- No till design with tungsten edge for long lasting life.
- Cast steel for extra wear resistance.
- 2 tungsten tiles, thicker at the tip.
- Common bolt size: 7/16 x 2 1/4.
- The Maxi knife has been sold Australia-wide for over 15 years.
- Hex head insert for easy fastening to tynes and only one spanner required.
Maxi Seeder
$53.00 + GST
- Minimum till application with improved seed depth control.
- Tungsten tipped leading edge and tungsten reinforced wing.
- Inverted "T" design for increased soil disturbance.
- Hex insert for head of bolt meaning only one spanner needed to fasten point to tyne.
- Maxipoints first ever point
- Designed specifically to fit single bolt cultivators bars and combines.
- Common bolt size: 7/16 x 2 1/4.
- Approx weight 1.10kg
Morris Contour 1
$89.00 + GST
- Suits Morris Contour 1 bars.
- Knife Point.
- 12mm wide tungsten
Slot Mate A Sweep 10"
$54.00 + GST
- Suits Slot Mate A system
- Heavy duty sweeps for full cut ripping.
Slot Mate A Sweep 12"
$56.00 + GST
- Suits Slot Mate A system.
- Heavy duty sweeps for full cut ripping.
Slot Mate Dyna
$56.00 + GST
- This point fits the Slot Mate quick change adapter.
- Modelled on the Dyna Blade Curved.
- Made from ultra long-life toughened steel.
- 3 tungsten tiles on the leading edge with the thickest tungsten at the tip where its needed most.
- 6" depth with a moderate angle of attack.
Slot Mate Flexi
$69.00 + GST
- Inverted T design to increase soil disturbance.
- Ultra long life toughened steel with tungsten tiles on leading edge and on the underside of the 60mm wing.
- Hard facing wire welded above the tungsten tiles and on the side of the point for ultimate wear protection.
- Point angle 70 degrees which is the same as the Slot Mate V knife point.
Slot Mate Straight - Super Long Life
$78.00 + GST
- Super Long Life point.
- This point does not dig as deep as the Slot Mate V due to its angle (60 degrees).
- A more horizontal angle means less horsepower is required to pull this point.
- Slot mate straight comes with 8mm liquid hose hole as standard.
- Extra tungsten and hardfacing.
- Exceptional wear protection.
Slot Mate Straight 12mm Tungsten
$54.00 + GST
- 12mm tungsten tiles on the leading edge with the thicker tungsten at the bottom where its needed most.
- This point does not dig as deep as the Slot Mate V due to its straighter angle (60 degrees).
- Due to a more horizontal angle less horse power is required to pull this point.
- Slot mate straight comes with 8mm liquid hose hole as standard.
Slot Mate Straight 15mm Tungsten
$58.00 + GST
- 15mm tungsten tiles on the leading edge with the thicker tungsten at the bottom where its needed most.
- This point does not dig as deep as the Slot Mate V due to its straighter angle (60 degrees).
- A more horizontal angle means less horsepower is required to pull this point.
- Slot mate straight comes with 8mm liquid hose hole as standard.
Slot Mate V5 Short
$58.00 + GST
- Shortest point in Slot Mate Range.
- 15mm tungsten.
- 50mm shorter than the Slot Mate V.
- The Slot Mate V5 Short is for use with hard ground, rough or rocky paddocks.
Slot Mate Vertical - Super Long Life
$78.00 + GST
- Slot Mate Vertical SLL, extra tungsten on point
- Effective working angle of 70 degrees and has a digging depth of 7".
- Extra tungsten and hardfacing.
- Exceptional wear protection.
Slot Mate Vertical 12mm Tungsten
$54.00 + GST
- The original and best selling Slot Mate.
- This point has 3 tungsten tiles on the leading edge with the thickest tile at the tip to increase wear life.
- The Slot Mate V 12mm has an effective working angle of 70 degrees and has a digging depth of 7".
- Working angle for minimum till seeding.
- Various tungsten options available.
Slot Mate Vertical 15mm Tungsten
$58.00 + GST
- The original and best selling Slot Mate point.
- This point has 3 tungsten tiles on the leading edge with the thickest tile at the tip to increase wear life.
- The Slot Mate V 15mm has an effective working angle of 70 degrees and has a digging depth of 7".
- Working angle for minimum till seeding.
- Various tungsten options available.